The Media Converter complies with IEEE802.3z, IEEE802.3AB Standards. It is desiqned to convert data signal between 10/100/1000 Base-T and 10OOBase-SX/LX fast Ethernet. It supports 10/100/1 OOOBase-T and 10OOBase-SX/LX applications. The data siqnal converted by such high performance media converter can be transmitted up to 120Km maximum byfiber-optical cable.
The Converter is equipped with two fiber optic connectors (One for transmitting-TX and another for receiving-RX) one RJ-45 Jacks and one external power suppy receptacle.
Six LED indicators are built-in for easy diagnosincl and monitorinq the status of power, Unshielded Twisted Paired (UTP) Link, UTP ActivitV, Fiber Link, Fiber Activity, Full duplex and data rates. It can be configured automatically for Full Duplex or Half Duplex operation. It is compact, cost-effective, low dissipative，high reliable and stable. It can be used in standalone applications, or Rack-Mounted applications where multiple media converter can be inserted into a rack-mount chassis (Up 16 units), and allowing all the converters to be powered by a single internal power supply
|Data rate (Mbps)
|Optical wavelength (nm)
||850,1310, 1550(for over 60Km long distance)
||Multi-mode 50/125, Sincjle mode 9/125
||SC/PC or ST/PC
|Max distance (km)
||5% to 90% non condensing
||The liqht on means the speed of TX is 1000M
||On :100 Mbps,Off: 10M(TX SQeed)
||On: TX port is connected , Blizing: ireceiving data
||On:FX port is connected,Blizing:receiving date
||The liclht on means the power is connected
||On: Full duplex work, OFF: half duplex work